home *** CD-ROM | disk | FTP | other *** search
/ Experimental BBS Explossion 3 / Experimental BBS Explossion III.iso / gus / digestv3.zip / V3N43.TXT < prev    next >
Text File  |  1993-05-13  |  24KB  |  685 lines

  1.  
  2.  
  3.  
  4.  
  5.  
  6. Ultrasound Daily Digest     Thu May 13 00:07     Volume 3: Issue  43  
  7.  
  8. Today's Topics:
  9.                              Archive.epas
  10.                     CD-ROM Audio Pass Thru Cable?
  11.                  DIGEST ADMIN: ***PLEASE READ THIS***
  12.               Does anyone have this SIS VLB motherboard?
  13.                         Goodbye and thank you.
  14.                                  GUS
  15.                         GUS=Midi Sampler ????
  16.               just bought my ultrasnd: some version nrs.
  17.                      List of working motherboards
  18.              MIDI box delay - Not Entirely Gravis' Fault
  19.                   People in search of midi keyboards
  20.                Prince of Persia 2 Problems w/ NEW SBOS
  21.                            Ultrabots & GUS
  22.                     Ultrasound Daily Digest V3 #42
  23.        Ultrasound FTP Sites - New files validated - May 9th, 93
  24.                     VMAP and GMOS Velocity mapping
  25.  
  26. Standard Info:
  27.     - Meta-info about the GUS can be found at the end of the Digest.
  28.     - Before you ask a question, please READ THE FAQ.
  29.  
  30. ----------------------------------------------------------------------
  31.  
  32. Date: Wed, 12 May 1993 16:09:33 -0500 (EDT)
  33. From: adam@jazz.epas.utoronto.ca (Adam Iles)
  34. Subject: Archive.epas
  35. Message-ID: <9305122009.AA03175@jazz.epas.utoronto.ca>
  36.  
  37. In case you haven't noticed archive.epas.utoronto.ca (a.k.a. klingon)
  38. has not been too healthy over the past week.  The disk was always had a
  39. problem booting up, but was solid once it got spinning, but now it
  40. looks like it's toast.  Anyways, a new disk has been installed, so it
  41. should be much more solid now.
  42.  
  43. -- 
  44. Adam Iles -- EPAS Computing.       adam@epas.utoronto.ca
  45.  
  46. ------------------------------
  47.  
  48. Date: Wed, 12 May 1993 10:32:33 -0500
  49. From: Larry Larraga <larry@brahms.udel.edu>
  50. Subject: CD-ROM Audio Pass Thru Cable?
  51. Message-ID: <9305121432.AA03533@fiesta.cns.udel.edu>
  52.  
  53. Does anyone know where to get the cable that goes from a Sony
  54. internal CD-ROM to the GUS' audio pass thru?
  55.  
  56.  
  57.  
  58. ------------------------------
  59.  
  60. Date: Wed, 12 May 93 14:03:19 CDT
  61. From: ddebry@itchy (Dave DeBry)
  62. Subject: DIGEST ADMIN: ***PLEASE READ THIS***
  63. Message-ID: <9305122003.AA01766@itchy>
  64.  
  65.     Heya, folks.
  66.  
  67.     Word has just come down to me that all non-work related mail &
  68. news items will probably need to be removed from the machines here.
  69. This means, of course, that the Digest and all of the sub-topic
  70. reflectors for the GUS may get kicked off this site.
  71.  
  72.     (This is still a maybe, but it's a pretty strong maybe.)
  73.  
  74.     In any case, should this happen, is there anyone with enough
  75. clout at their site to let me put up the lists there?  If you give me
  76. an account at your site, I'll even maintain the lists, so you won't
  77. have to deal with them once they're in.  
  78.  
  79.     (Besides the new account, a root user needs to make some
  80. modifications to the /usr/lib/aliases (or /etc/aliases, depending on
  81. your system type) for the lists to work.)
  82.  
  83.     As far as space goes, they don't take much.  It would be
  84. possible for me to work with just 1 meg of disk space, though I'd
  85. really prefer about 2 meg.  Still, that's not a lot.
  86.  
  87.     The new mailserver code is set up to put a minimal load on the
  88. system while it works.  The machine it runs on here (itchy) is also
  89. used as an important file & compute server for my group, and the
  90. mailserver doesn't impede that at all.
  91.  
  92.     Anyway, if you can swing this, drop me a private piece of mail
  93. and we'll chat.  It would be really helpful... I don't think many
  94. people are interested in seeing the Digest disappear.
  95.  
  96.     Thanks!
  97.  
  98. -- 
  99. Dave  ddebry@ debry@   \ 
  100. DeBry dsd.    peruvian. | "A jar of eyes can be a tasty treat."
  101.       es.     cs.utah.  |
  102.       com     edu      /  
  103.  
  104. ------------------------------
  105.  
  106. Date: Wed, 12 May 1993 12:04:15 EDT
  107. From: Marc Rouleau <mer6g@fuggles.acc.Virginia.EDU>
  108. Subject: Does anyone have this SIS VLB motherboard?
  109. Message-ID: <9305121604.AA23226@orca.es.com>
  110.  
  111.  
  112.  
  113. I'm thinking of buying it for $180 + $8 s&h, but I only want it if it
  114. will do 16-bit DMA correctly.  Will email how-to-order details if anyone's
  115. interested.
  116.  
  117. Alternately, does anyone know of an inexpensive mail-order 486 motherboard
  118. w/o CPU that works perfectly with the Gus?  I don't need localbus but do
  119. not mind if it's there.
  120.  
  121.     -- Marc Rouleau
  122.  
  123.  -----------------------------------
  124. VESA Mother Board Information
  125.  
  126. Basic Description
  127.  
  128. Battery:       Rechargeable Ni-Cad on the system board.
  129. BIOS:          AMI, supports 2.88 MB Floppy and Auto IDE detection.
  130.                Shadow RAM, Hard disk type 47, Power on password,
  131.                and Boot up drive sequence.
  132. Board Size:    2/3 Baby AT size.  8.7" x 9.7"
  133. Cache:         256K Static RAM CPU Cache is standard.
  134.                The cache layout is direct mapped, not set associative.
  135. Chipset:       SIS
  136. Clock Speeds:  No need to change oscillators.  Set clock speed to 25, 33,
  137.                and 50 MHz by changing jumpers.  Don't worry, the
  138.                486DX2-66 has an external clock of 33 MHz, and it works fine.
  139. Cooling:       An extra heat sink and a CPU cooling fan is standard for
  140.                486DX2-66 motherboards.
  141. CPU Support:   The ZIF (Zero Insertion Force) socket accepts a variety of
  142.                CPUs.  486SX, 486DX, 486DX2, and the upcoming Pentium
  143.                P24T CPUs are all supported.
  144. Manufacturer:  U-Tron
  145. Performance:   486DX2-66.  Landmark 222.95 MHz.  45,517 Dhrystones.
  146.                104.3 Norton SI.  11091K Whetstones.
  147. RAM Support:   256K, 1MB, and 4MB SIMMs accepted.
  148.                Requires Fast Page Mode DRAM with access time of less
  149.                than 80ns.  8 slots available in 2 banks.  Memory 
  150.                configurations are:
  151.                1, 2, 4, 8, 16, 20, and 32 MB.
  152. Slots:         7 slots total.  2 Slots have the VESA Local Bus extensions.
  153. Warranty:      1 Year, repair or replace by our discretion.
  154.  -----------------------------------
  155.  
  156. ------------------------------
  157.  
  158. Date: 12 May 93 09:27:07 AST
  159. From: GJames <GJAMES@SHARK.STMARYS.CA>
  160. Subject: Goodbye and thank you.
  161. Message-ID: <MAILQUEUE-101.930512092707.288@science.stmarys.ca>
  162.  
  163. I am finally giving up on the Ultrasound. I got one last December and
  164. have been trying to get the thing to work properly ever since. I
  165. actually believed the box when it said SOUND BLASTER compatible. Since
  166.  
  167.  
  168. my mainreason for getting a sound card was to play games, I should
  169. have bought a sounblaster, but the promise of wavetable quality sounds
  170. was too much to ignore. I have got the thing working with most games
  171. (with various combinations os -x? -o?) but with each release of SBOS
  172. being more bug filled than the last I dont hold much hope for the
  173. GUS's future.
  174.  
  175. Anyway the reason I am posting is to say thank you to all of the
  176. people who have helped me through my first sound card experience. One
  177. good thing that came out of the GUS was that I know all of the
  178. possible things that can go wrong with setting up and using sound
  179. cards.
  180.  
  181. ------------------------------
  182.  
  183. Date: Wed, 12 May 93 9:35:46 PDT
  184. From: hippo@sfsuvax1.sfsu.edu (Vincent Poy)
  185. Subject: Re: GUS
  186. Message-ID: <9305121635.AA08276@sfsuvax1.sfsu.edu>
  187.  
  188. Hi there fellow GUS Users,
  189.  
  190.      I have just two questions I need an answer to and it will be
  191. appreciated if you can help me out.  Thanks in advance!
  192.  
  193. 1) Is there any way to control the Volume with Games and stuff that uses
  194.    Native GUS Support Mode?
  195. 2) Is there anyway I can plug something like a Walkman or DiscMan to the
  196.    Line In Jack on the GUS and then have music go through the GUS and
  197.    out the Line Out in DOS and in Windows?
  198. -- 
  199.  
  200. Cheers,
  201.  
  202. Vince
  203.  
  204. ------------------------------
  205.  
  206. Date: Mer, 12 Mai 93 10:35:38 FRA
  207. From: 9269Z%FRESTP11.BITNET@FRMOP11.CNUSC.FR
  208. Subject: GUS=Midi Sampler ????
  209. Message-ID: <9305120837.AA17603@orca.es.com>
  210.  
  211. Date: 12 Mai 1993, 10:29:35 FRA
  212. From: Benjamin Ryzman           44.41.11.02          9269Z    at FRESTP11
  213. To:   ultrasound@dsd.es.com
  214.  
  215. About my trouble with 'patch allocation on the fly' is that I would like
  216. to use my GUS like a real MIDI sampler: be able to use sysex or something
  217. to upload new samples from the disk to the card, without having to use
  218. the .CFG files. It would be very neat if there was a new version of the
  219. Windows drivers for this.
  220.  
  221.  
  222.  
  223. Also, from what the retailer docs of the GUS say, the MIDI interface box is to
  224. be MPU-401 compatible. Does that mean that by the way of a cable between the
  225. MIDI in and the MIDI out, I shall be able to use my GUS with the Voyetra
  226. sequencers for DOS ?
  227.  
  228. ------------------------------
  229.  
  230. Date: 12 May 93 11:06 -0700
  231. From: Rolf Velthuys <velthuys@cs.ubc.ca>
  232. Subject: just bought my ultrasnd: some version nrs.
  233. Message-ID: <1012*velthuys@cs.ubc.ca>
  234.  
  235. Hi,
  236.  
  237. just bought an ultrasnd card, in Vancouver (that's very close to
  238. gravis HQ). It came with 5 disks, labelled 2.05. The SBOS version that
  239. comes with is is SBOS 2.04 (how is that related to this new
  240. SBOS2.00B7.zip file?).  So far, no problems. Tried most of the demo
  241. software, and used the GUS/SBOS2.04 succesfully with Falcon3 &
  242. Wizardry 7 (no switches needed). The readme file was dated: 15/03/93.
  243.  
  244. My setup: 486DX2/66 VLB/ISA, 8mb memory. Have to use DOS unfortunately
  245. to use the GUS.
  246.  
  247. CU
  248. Rolf
  249.  
  250. ------------------------------
  251.  
  252. Date: Wed, 12 May 1993 12:02:05 EDT
  253. From: Marc Rouleau <mer6g@fuggles.acc.Virginia.EDU>
  254. Subject: List of working motherboards
  255. Message-ID: <9305121602.AA23212@orca.es.com>
  256.  
  257. Some motherboards do not support DMA well and as a result do not work
  258. well with the Gravis Ultrasound sound card.  What follows is a list of
  259. answers to the following three questions:
  260.  
  261. 1.  Describe your motherboard.
  262. 2.  Can you use 16-bit DMA?
  263. 3.  Any other problems?
  264.  
  265. Hopefully this list will help us all to purchase PC's and motherboards
  266. which support DMA.
  267.  
  268. I am willing to continue serving as a clearinghouse for this information,
  269. so please let me know about your motherboard.
  270.  
  271. Note that the AIR UMC localbus boards are a bit tricky.  The UL board
  272. with three proprietary localbus slots works fine; the VL board with one
  273. VESA localbus slot works poorly.
  274.  
  275.     -- Marc Rouleau
  276.  
  277.  
  278.  
  279. 1.  AIR. 486UL pre-VESA localbus motherboard (w/ 486DX2-66), UMC
  280.     82C480 AT chipset with 3 proprietary localbus slots
  281. 2.  Yes, 16-bit DMA works.
  282. 3.  No problems at all.
  283.  
  284. 1.  AIR 486VL with 486DX-33, AMIBIOS, UMC 82C480 AT chipset with
  285.     UMB82C482AF/UMB82C206L/UMB82C481A, 1 localbus slot
  286. 2.  No, 16-bit DMA does not work.
  287. 3.  Clicking noises w/ 1M GUS RAM, low MIDI in Windows w/ high WAV volume.
  288.  
  289. 1.  486DX-50 VLB, UMC
  290. 2.  Yes, 16-bit DMA works.
  291. 3.  No reported problems
  292.  
  293. 1.  486DX-50 VLB, Bioteq
  294. 2.  Don't know if 16-bit DMA works.
  295. 3.  Didn't work
  296.  
  297. 1.  HP Vectra 486U (used in 486/25U, 33U, 50U, and 66U computers)
  298. 2.  Yes.
  299. 3.  None that I know of.
  300.  
  301. 1.  486DX-33 ISA-486SIQ, AMIBIOS, 256K cache, chipset is a single SIQ chip.
  302. 2.  Yes, 16-bit DMA works.
  303. 3.  No problems.
  304.  
  305. 1.  486DX-33, OPTi
  306. 2.  Yes, 16-bit DMA works.
  307. 3.  "I have trouble with early versions of SBOS, but that's most likely
  308.     due to running DR DOS 6.0, not the motherboard."
  309.  
  310. 1.  486DX-33, OPTi ?/?/82C206Q, 1/93
  311. 2.  No, 16-bit DMA does not work.
  312. 3.  Windows crashes after doing too much sound-oriented stuff.  DOS stuff
  313.     works fine: sbos, playmidi, gusmod, p669gu0, etc.
  314.  
  315. 1.  486DX-33, OPTi 82C392/82C493/F82C206
  316. 2.  No, 16-bit DMA does not work.
  317. 3.  "Windows driver seems to drop instruments now and then. About 1
  318.     instrument in 5-10 seconds in faster MIDI songs, like PopCorn."
  319.  
  320. 1.  DTK 486DX-33, Symphony, 8/92
  321. 2.  Yes, 16-bit DMA works.
  322. 3.  No reported problems
  323.  
  324. 1.  486-20/25/33, ETEQ Micro Cougar II chipset, board by Mitac,
  325.     5/92 AMIBIOS, no cache
  326. 2.  Yes, 16-bit DMA works.
  327. 3.  No problems -- uses DMA w/ SCSI controller, SBPro, and GUS
  328.  
  329. 1.  486DX-33 Orchid VLB 256K cache, 1/93, AMIBIOS
  330. 2.  Yes, 16-bit DMA works.
  331.  
  332.  
  333. 3.  No problems.
  334.  
  335. 1.  486DLC (Cyrix), OPTi 391 motherboard, 12/92 (HI-TECH)
  336. 2.  No, 16-bit DMA does not work.
  337. 3.  No reported problems
  338.  
  339. 1.  386-40, Bioteq
  340. 2.  Don't know if 16-bit DMA works.
  341. 3.  No reported problems
  342.  
  343. 1.  386-40 PC-Chips chipset w/ 82C206 DMA controller
  344. 2.  No, 16-bit DMA does not work.
  345. 3.  No problems.
  346.  
  347. 1.  386-40 OPTi & SiS chipset w/ SiS 85C206 DMA controller
  348. 2.  Yes, 16-bit DMA works.
  349. 3.  No problems.
  350.  
  351. 1.  386-25/33/40, OPTi 82C391/82C392/82C206
  352. 2.  Yes, 16-bit DMA works.
  353. 3.  No reported problems
  354.  
  355. 1.  Micronics 386, 2/91 (Gateway 2000)
  356. 2.  Yes, 16-bit DMA works.
  357. 3.  No reported problems
  358.  
  359. 1.  "Soyo 386DX-33 (Soyo is the Far Eastern Manufacturer) with an ITT
  360.     387 and AMI BIOS. It has a mix of OPTI and CHIPs chipset, including
  361.     what I think may be the dreaded OPTI DMA-killer chip (It's in another
  362.     part of the country, so I can't tell you the chip numbers)."
  363. 2.  Yes, 16-bit DMA works.
  364. 3.  "I have had problems with SuperStor and DOS Games. Games start OK
  365.     and then hang after a period of time, but the music continues."
  366.  
  367. 1.  386-25, DCA chipset?, Packard Bell Legend 300SX
  368. 2.  Don't know if 16-bit DMA works.
  369. 3.  "Problems - problems with Windows 3.1 MIDI support. MID file
  370.     tempos are bad, they drop notes, truncate notes, play wrong
  371.     notes. Any time I use certain patches (flute, panflute,
  372.     ocarina) Windows will crash and return EMM386 exception
  373.     error #06. All MIDI applications (Media Player, Patch
  374.     Manager, Winjammer) get this error."
  375.  
  376. 1.  DTK PEM-2500 (25Mhz 386DX)  DTK BIOS
  377. 2.  No problem w/ 16 bit DMA
  378.     (I also have 5.7 Mhz Adaptec 1542B SCSI controller in the same system)
  379. 3.  No problems at all
  380.  
  381. 1.  286-20, C&T NEAT 82C212B/82C206/?
  382. 2.  Yes, 16-bit DMA works.
  383. 3.  No reported problems
  384.  
  385. ------------------------------
  386.  
  387.  
  388.  
  389. Date: 12 May 93 13:30:42 +0100
  390. From: Bjorn Havard Kleven <BJORNHK@dhhalden.no>
  391. Subject: MIDI box delay - Not Entirely Gravis' Fault
  392. Message-ID: <E997846215@sofus.dhhalden.no>
  393.  
  394. > So, hopefully a million other people haven't posted the info
  395. > (particularly to that poor guy in Italy) but, as far as I know, there have
  396. > still been no sightings of the GUS midi connector (or, for that matter, the
  397. > 16-bit recording daughtercard). I'm a bit surprised about this.
  398. > The midi connector seems pretty trivial - not exactly an enromous R&D job.
  399. > And there's obviously a market for it. So, Gravis, WHERE IS IT? (You're
  400. > throwing money away ...)
  401.  
  402. I just have to defend Gravis a little here. The long wait is due to
  403. the appearantly simple process of making the case for the box - which
  404. in reality is a far from trivial process - Gravis waited weeks
  405. (months) for the molds to be ready from whoever makes them. The
  406. current delay is also due to some problems with the mold.
  407.  
  408. As for the 16-bit daughterboard, the delays are all the results of the
  409. desire to make this daughterboard as good as possible - among the
  410. best. I don't remember which it is, but one of the key components
  411. will be the same as used on the Turtle Beach Multisound - a very good
  412. and very expensive board.
  413.  
  414.      -=* Bjorn :: bjornhk@dhhalden.no
  415.    ACCESS DATA :: TEL: (+47)-9-17 50 48/61-97 311 FAX: 61-97 312
  416.                   BBS: 61-97 945 300-14400 bps, 24 hrs
  417.  
  418. ------------------------------
  419.  
  420. Date: 12 May 1993   16:39:31 PST
  421. From: chrisw <chrisw@leland.Stanford.EDU>
  422. Subject: People in search of midi keyboards
  423. Message-ID: <9305122345.AA15377@leland.Stanford.EDU>
  424.  
  425. Hi everyone. Just thought I'd forward on this ad I saw in rec.music.makers.
  426. synth since there's been quite a few people looking for keyboards to use
  427. with their GUS. Note that PC-200's are kind of small (4 octave) - though
  428. they do have proper size keys. My feeling is they might be not bad for a 
  429. home setup where you don't want the whole room taken up by a 88-key
  430. weighted monster. (They're easy to lift as well. I risk permanent back 
  431. injury whenever I lift mine).
  432.  
  433. Some disclaimers: I don't know this person at all. I'm just passing on the
  434. ad. I'm also not sure of the going price on these things (although they
  435. are normally offered on rec.music.makers.synth at about this price). 
  436. I guess if it was me I'd offer $150. Make sure you ask about how worn
  437. it is / whether it's home use only.
  438.  
  439. Chris.
  440.  
  441.  
  442.  
  443. >>FOR SALE
  444. >>--------
  445. >>Roland PC-200 keyboard controller           $180 obo
  446. >>49 key C-C synth action keyboard. Can send on any MIDI channel,
  447. >>Functions: mod stick/pitch wheell, velocity sensitivity control,
  448. >>pan control, channel select.
  449. >>Can be powered by battery or any 9V power supply.
  450. >>
  451. >>--------
  452. >>AFC
  453. >>claassen@ebs330.eb.uah.edu
  454. >>aclaasse@nyx.cs.du.edu
  455.  
  456. ------------------------------
  457.  
  458. Date: Wed, 12 May 93 12:22:00 -0500
  459. From: wayne.sterling@sosinc.com (Wayne Sterling)
  460. Subject: Prince of Persia 2 Problems w/ NEW SBOS
  461. Message-ID: <429.10.uupcb@sosinc.com>
  462.  
  463. To correct the problems with SBOS and Prince of Persia 2, you should do
  464. the following:
  465.  
  466. make a batch file that has:
  467. SET ULTRASND=220,1,1,7,7
  468. SET BLASTER=A220 I7 D1 T1
  469. call sbos.bat
  470. prince.exe
  471. ---------------------------
  472. You will have to change your setup to interrupt 7 if you have changed
  473. it, but this configuration is supposed to work.  Atleast that was what I
  474. was told.
  475.  
  476. wayne.sterling@sosinc.com
  477.                                                                                             
  478. ----
  479. +-------------------------------------------------------------------+
  480. | Southern On-line Services - SysOp: Russell Jackson - 504-356-0790 |
  481. | 2000+ Windows Files, 2.4 Gig, Internet, RIME and Throbnet On-line |
  482. +-------------------------------------------------------------------+
  483.  
  484. ------------------------------
  485.  
  486. Date: Wed, 12 May 93 13:02:09 MES
  487. From: fischer@tmpmbx.netmbx.de (Axel Fischer)
  488. Subject: Ultrabots & GUS
  489. Message-ID: <m0ntEZe-0003vsC@tmpmbx.netmbx.de>
  490.  
  491. >From: Steven.Morrison@f1.n251.z1.fidonet.org (Steven Morrison)
  492. >Subject: Sound in UltraBots by NovaLogic
  493. >Message-ID: <30109.2BEF7992@ns.fidonet.org>
  494.  
  495. >Is there any way at all to get sound out of UltraBots on the Ultrasound? 
  496.  
  497.  
  498.  
  499. What for problems fo you have with ultrabots?
  500.  
  501. I borrowed the game from a friend and had no problem with SBOS 2.04.
  502. No switches are required.
  503.  
  504. -Axel
  505.  
  506. ------------------------------
  507.  
  508. Date: 12 May 93 13:23:11 +0100
  509. From: Bjorn Havard Kleven <BJORNHK@dhhalden.no>
  510. Subject: Re: Ultrasound Daily Digest V3 #42
  511. Message-ID: <E9778A4CCC@sofus.dhhalden.no>
  512.  
  513. > So, hopefully a million other people haven't posted the info
  514. > (particularly to that poor guy in Italy) but, as far as I know, there have
  515. > still been no sightings of the GUS midi connector (or, for that matter, the
  516. > 16-bit recording daughtercard). I'm a bit surprised about this.
  517. > The midi connector seems pretty trivial - not exactly an enromous R&D job.
  518. > And there's obviously a market for it. So, Gravis, WHERE IS IT? (You're
  519. > throwing money away ...)
  520.  
  521. I just have to defend Gravis a little here. The long wait is due to
  522. the appearantly simple process of making the case for the box - which
  523. in reality is a far from trivial process - Gravis waited weeks
  524. (months) for the molds to be ready from whoever makes them. The
  525. current delay is also due to some problems with the mold.
  526.  
  527. As for the 16-bit daughterboard, the delays are all the results of the
  528. desire to make this daughterboard as good as possible - among the
  529. best. I don't remember which it is, but one of the key components
  530. will be the same as used on the Turtle Beach Multisound - a very good
  531. and very expensive board.
  532.  
  533.      -=* Bjorn :: bjornhk@dhhalden.no
  534.    ACCESS DATA :: TEL: (+47)-9-17 50 48/61-97 311 FAX: 61-97 312
  535.                   BBS: 61-97 945 300-14400 bps, 24 hrs
  536.  
  537. ------------------------------
  538.  
  539. Date: 11 May 1993 06:42:40 GMT
  540. From: twong@civil.ubc.ca (Thomas Wong)
  541. Subject: Ultrasound FTP Sites - New files validated - May 9th, 93
  542. Message-ID: <1snht0INNj7t@iskut.ucs.ubc.ca>
  543.  
  544. ReprintFrom: comp.sys.ibm.pc.soundcard
  545.  
  546.                     GRAVIS ULTRASOUND FTP SITES NEWS
  547. ==========================================================================
  548. Ftp Site: archive.epas.utoronto.ca     Directory: pub/pc/ultrasound
  549.           wuarchive.wustl.edu                     systems/msdos/ultrasound
  550.  -------------------------------------------------------------------------
  551.  
  552.  
  553.  
  554. Hello all. I've just validated the following files for today,
  555. May 9th, 93.... in both of our ftp archive sites:
  556.  
  557.  
  558. Subdirectory: ..../sound/midi/files
  559.  
  560. beetho27.zip, biginjpn.zip, chrismid.zip, chrisnot.zip, depeche.zip,
  561. depinv1.zip, fairmid.zip, hazy.zip, mid.zip, midpcfix.zip, wholenew.zip
  562.  
  563.  
  564. Subdirectory: ..../sound/midi/util
  565.  
  566. gusorg.exe - version 2.0 of GUS Organ for composing midi files
  567. winmusic.zip - Windows midi composer/player (no patch caching)
  568.  
  569.  
  570. Subdirectory: ..../sound/patches/files
  571.  
  572. harp.zip
  573.  
  574.  
  575. Subdirectoy: ..../sound/patches/util
  576.  
  577. ped2.arj - new version of Patch Editor (windows)
  578.  
  579.  
  580. Subdirectory: ..../sound/mod/util
  581.  
  582. gusmp.zip - Modplay 1.21b MOD player for Ultrasound
  583. gusmpsrc.zip - GUS Modplay's source code
  584.  
  585.  
  586. Subdirectory: ..../sound/misc
  587.  
  588. gldwav10.zip - Goldwave 1.00 sound editor for Windows
  589.  
  590.  
  591. Subdirectory: ..../info
  592.  
  593. modform.zip - Amiga (ProTracker) Module format document
  594.  
  595.  
  596. Subdirectory: ..../util/unix
  597.  
  598. snd-driv-1.99.3.tar.Z - Hannu Savolainen's Linux sound driver for the
  599.                         Ultrasound
  600.  
  601.  
  602.  
  603. Notes to UPLOADERS:
  604. ===================
  605.  
  606.  
  607.  
  608. ibt93mid.zip was uploaded incorrectly, and can't be unzipped. Can the
  609. uploader please reupload it? Thanx!
  610.  
  611. adagio04.tar.Z and mp-perl.tar.Z can't be uncompressed. The sound driver
  612. was ok and was validated but can the uploader please reupload these 2
  613. files again? Thanx!
  614.  
  615.  
  616. Ee-bee-dee-ee-bee-dee.... that's all folks!
  617.  
  618. Thomas.
  619.  
  620. ------------------------------
  621.  
  622. Date: Wed, 12 May 93 3:14:02 CDT
  623. From: cowles@hydra.convex.com (John Cowles)
  624. Subject: VMAP and GMOS Velocity mapping
  625. Message-ID: <9305120814.AA04341@hydra.convex.com>
  626.  
  627. .tc says:
  628. >Morgan_Stair@dl5000.bc.edu says:
  629. >> What does vmap mean anyway... is it that the GUS-windows-midi drivers
  630. >> and GUS-DOS-playmidi use logarithmic volume scale, and thus midi files
  631. >> need to have all their "volume" information changed for GUS?
  632. >Correct. The GUS's volume control is logarithmic, while Roland's
  633. >synthesizers use linear volume control from 0-127.
  634. >One of the functions GMOS will perform is to use a lookup table
  635. >to convert these linear volume to logarithmic volume.
  636. >.tc
  637.  
  638. Please don't forget the volume controller (7) and the expression
  639. controller (11). VMAP currently ignores these (which is a problem). A GS Init
  640. sets volume to 100, and expression to 127, so even though a midifile does
  641. not need to have an explicit volume setting inside it, there is an implicit
  642. one due to the default GS setting. VMAP assumes that the volume and
  643. expression settings are always equal to 127!
  644.  
  645. Finding the actual volume can be quite complex, even on a synth with
  646. linear volume curves. For example, if I set the volume controller to
  647. 100, the expression controller to 100 and then output a note with a
  648. velocity of 100, I will actually have a note with an absolute velocity
  649. of .7890625 * .7890625 * .7890625 of max - about 62! [ 128 * (101/128)**3 - 1 ]
  650.  
  651. In defense of Mr. Tran (the author of VMAP), this becomes much more complex
  652. when the velocity curves are logarithmic!
  653.  
  654. John
  655.  
  656. -- 
  657.  
  658.  
  659.      John Cowles        cowles@hydra.convex.com
  660.                         Convex Computer Corp.  214 497 4375
  661.                         3000 Waterview Pkwy
  662.                         Richardson, Tx. 75080
  663.  
  664. ------------------------------
  665.  
  666. End of Ultrasound Daily Digest V3 #43
  667. *************************************
  668.  
  669. To post to tomorrow's digest:                        <ultrasound@dsd.es.com>
  670. To (un)subscribe or get help:                <ultrasound-request@dsd.es.com>
  671. To contact a human (last resort):              <ultrasound-owner@dsd.es.com>
  672.  
  673. FTP sites:                archive.epas.utoronto.ca         pub/pc/ultrasound
  674.                           wuarchive.wustl.edu       systems/msdos/ultrasound
  675. Hints:
  676.       - Get the FAQ from the FTP sites or the request server.
  677.       - Mail to <ultrasound-request@dsd.es.com> for info about other GUS
  678.         related mailing lists (UNIX, OS/2, GUS-MIDI, etc.)
  679.  
  680.  
  681.